Only heaters rated 4 stars or more Amazon UK prices checked daily Free size & running cost calculators
All collections
URAQT Parking Heater Exhaust Pipe

URAQT Parking Heater Exhaust Pipe

Diesel Heater Exhaust

From: Uraqt

What is this? It is a 200cm stainless steel exhaust hose with a silencer, made to replace the short pipe that comes with a diesel air heater. This Parking heater exhaust pipe has a 25mm diameter and is made from 304 grade stainless steel.

What does it do? It carries exhaust gas further from the heater and routes it to the side of the vehicle away from the awning. The longer path and the improved silencer help reduce exhaust noise. One German buyer reported a drop of around 40%.

Two hose clips come in the box. It is a universal fit and sells at £13.99. Other lengths of 60cm, 120cm and 300cm are also made.


Check Price
Amazon UK

Product Features

304 Stainless Steel - Grade 304 stainless resists corrosion and heat better than plain mild steel. A heater exhaust sits near hot gas and damp air under a vehicle. Rust is the usual reason these pipes fail. This material should last longer than a basic metal pipe and stay safe in use. 200cm Length - Why does length matter? The standard pipe on most diesel heaters is short. At 200cm this one moves the exhaust outlet well away from the heater and the awning. People have used it to vent a heater outside a garage and a workshop. Three other lengths are sold if you need less or more. 25mm Diameter - The pipe has a 25mm bore. Check your heater's outlet size before you buy because the seller says the pipe must match the heater model. One buyer warned against cutting the pipe at the ribbed section. The inner diameter drops below 25mm there. Cut only on the smooth parts.
Improved Silencer - Does it make a difference? Buyers say yes. A German reviewer measured a 40% noise reduction. An Italian buyer used it on a generator and called the noise almost unnoticeable. A boat owner found the silencer is not airtight though. It is not suited to boats. Two Hose Clips - Two mounting clips are in the box. Slide them onto the pipe and tighten them to fix it to the heater outlet. Fitting takes a few minutes and needs no special tools. It directly replaces an old or broken pipe. That saves buying clips separately. Flexible Routing - The hose bends so you can run it around obstacles. It does not make a tight 90 degree turn though. One buyer drilled a hole in a garage wall at a slight angle to pass the pipe through. Plan the route and the exit point before you fix it in place.

FAQs

What size and lengths does this exhaust pipe come in?

The pipe has a diameter of 25mm. It is sold in four lengths: 60cm, 120cm, 200cm and 300cm. This listing is for the 200cm version. Pick the length that reaches from your heater outlet to the point where you want the exhaust to leave the vehicle. Avoid cutting it down, as one buyer found the inside diameter shrinks below 25mm if you cut through the ribbed section.

What is in the box?

You get one 304 stainless steel exhaust pipe and two hose clips. The clips are used to fix the pipe to the heater outlet and to hold it in place. Nothing else is supplied. The listing says to confirm that your heater model matches the pipe size before you fit it.

Will it fit my diesel parking heater?

It is listed as a universal fit for most air diesel parking heaters. The size is 25mm. Check the exhaust outlet on your heater before ordering. If the outlet is a different diameter the pipe will not seat properly. The listing does not name specific heater brands, so measuring your outlet is the safest check.

Does it really reduce noise?

It helps in two ways. The longer pipe moves the exhaust outlet away from where you sit or sleep. This is useful when an awning is on one side of the vehicle. The improved silencer also takes down the sound of the exhaust. A German buyer reported a 40% reduction. An Italian buyer fitted it to a generator and called the remaining noise almost imperceptible. A generator will still make some noise.

What is the pipe made from and how long will it last?

It is made from 304 stainless steel. This grade resists corrosion, wear and high temperatures. The listing says the service life is far longer than that of ordinary metal pipes. There is no stated warranty period. One buyer noted that it is made in China and could not yet judge long-term life. Another said it had lasted well so far.

How difficult is it to install?

It is a direct replacement for an old or broken heater exhaust pipe. You remove the old pipe and fit the new one. Then you secure it with the two clips. The listing says it takes a few minutes. You may need to drill a hole if you want to route the pipe through a wall or floor. One buyer drilled at a slight angle because the pipe will not make a tight 90 degree turn.

Can I use it with a generator or on a boat?

Buyers have used it on petrol generators with good results. One extended the exhaust outside a garage and another moved their generator to new locations. It is not suited to boats. One reviewer said the silencer is not airtight. Always make sure exhaust gas is vented fully outside, as it contains carbon monoxide.

What is the returns policy?

Returns are free. You can return the item for any reason if it is new and unused. You get a full refund with no deduction for return shipping. Amazon gives a 30-day right of return on many products. To start a return, go to your orders and choose the return method. Then send it back.

URAQT Parking Heater Exhaust Pipe Specs

Parking heater exhaust pipe Specs

## URAQT Parking Heater Exhaust Pipe with Silencer (200cm) The URAQT Parking Heater Exhaust Pipe is a flexible 304 stainless steel pipe for diesel air parking heaters. This listing is the 200cm length. The pipe has a 25mm diameter. It comes with two hose clips. The listing title says it has an improved silencer. It is also sold in 60cm, 120cm and 300cm lengths. ### What it does The pipe replaces the short exhaust pipe supplied with a diesel heater. It carries the exhaust further away from the heater. A common use is to route it to the side of the vehicle away from an awning. A longer exhaust path and the silencer help to reduce the noise from the heater tail pipe. ### Material and build The pipe is made from 304 stainless steel. It is corrosion-resistant, wear-resistant and high-temperature resistant. The listing says it lasts far longer than ordinary metal pipes. The finish is the original stainless steel colour. The manufacturer part number is U4-2MFQGXY231126-FBA. The pipe is made in China. ### Fitting The pipe is a direct replacement for an old or broken heater exhaust pipe. You fit one clip at each end and tighten it. The listing says this takes a few minutes. Check that the heater model matches the 25mm pipe size before you install it. The pipe is listed as universal fit. It is designed for most diesel air parking heaters and for the exhaust silencer. ### What owners report - Generator use: Several buyers used it to extend a generator exhaust. One said it was fairly quiet and fitted well. They also said it is flexible and has lasted well so far. It let them place the generator in spots they could not use before. Another buyer ran an emergency generator inside a garage with no noise outside. - Noise reduction: A German buyer said the silencer cut noise by 40%. An Italian buyer said the noise was almost unnoticeable with the silencer fitted. - Bends: One buyer used it to take an exhaust outside a garage wall. The pipe does not make a tight 90 degree bend. They drilled the wall hole at a slight angle. - Cutting to length: The Italian buyer said to pick the length you need. If you cut the pipe where the ridged (knurled) section is, the inner diameter drops below 25mm. - Boat use: One buyer said the silencer is not airtight. They could not use it on a boat. - Longevity: One buyer said it is too early to know how long it will last as it is made in China. Reviewers describe the quality as good and as described. They also call it good value for money. A buyer who used it with a workshop parking heater was happy with it. ### Specifications
SpecificationDetail
BrandURAQT
ManufacturerURAQT
Manufacturer part numberU4-2MFQGXY231126-FBA
Model numberURAQT
ASINB0CQ519FY6
Item typeParking heater exhaust pipe
CategoryCar exhaust pipes
MaterialStainless steel
Stainless steel grade304
ColourOriginal stainless steel
Pipe diameter25mm
Length (this listing)200cm
Lengths available60cm, 120cm, 200cm and 300cm
Pipe styleFlexible
SilencerImproved silencer (per listing title)
Corrosion resistanceYes
Wear resistanceYes
High-temperature resistanceYes
Hose clips included2
Package contents1 x 304 stainless steel exhaust pipe and 2 x hose clips
Unit count1
Automotive fit typeUniversal fit
Compatible heatersMost diesel air parking heaters
Intended useReplacement for a short or broken heater exhaust pipe
Country of originChina
I did not run any web research. Everything above comes from the product data you supplied. I left out the manufacturer warranty entry because it only read "1.". I also left out the sales rank, seller and fulfilment details because they are not product specs.