This 9-piece kit from HOIIME extends the warm air system of an Air diesel heater. It includes 2 lengths of 7.5cm aluminium foil ducting, 2 vent outlets, 1 black plastic T/Y piece and 4 chrome hose clamps.
What does it do? The T/Y piece splits the warm air flow so you can connect 3 hoses at once. Each vent has a front panel that rotates 360 degrees to direct the heat where you need it.
It suits 2kW, 5kW and 8kW heaters and fits Eberspacher, Webasto, Propex and ATC ducting. The full set weighs 0.56kg and costs £21.99.
The two ducting lengths are made from aluminium foil. Why does that matter? It handles high heat and resists corrosion, so it should last well in a van or boat. It is also light and easy to bend into place. Each length is 7.5cm across.
T/Y branch piece -The black plastic T/Y piece takes 7.5cm ducting and splits one heater outlet into 3 hoses. What is the benefit? Warm air can reach the cab and the rear at the same time. It also adds an extra vent to an existing system.
360 degree rotating vents -Each of the 2 vent outlets has a front panel that turns a full 360 degrees. So you can point warm air at a windscreen or a seat. The panel comes off to reach the screw holes. That makes fixing it down quick and keeps the vent firmly in place.
The kit suits 2kW, 5kW and 8kW diesel air heaters. It fits Eberspacher, Webasto, Propex and ATC ducting. Check your own heater first. Does it use 7.5cm ducting? If so this set should connect without adapters. It also replaces old or damaged heating pipes.
Chrome metal hose clamps -Four chrome metal hose clamps come in the box. Why do they matter? Loose ducting can slip off a joint or leak warm air. Tightened clamps hold each connection firmly. One buyer wrote that the set fitted well with no leaks. Ratings average 4.6 out of 5 from 28 ratings.
Wide range of uses -It is not just for cars. The set suits trucks, ships, heavy machinery, agricultural machinery and industrial machinery. It also works for hot and cold air ducts and ventilation. The whole set weighs 0.56kg so it adds very little load to a camper build.
It is mainly made for 2KW, 5KW and 8KW diesel air heaters. The listing names Eberspacher, Webasto and Propex warm air ducting. The T/Y piece is also listed as suitable for ATC heaters. Check that your heater outlet has a 75mm inner diameter before you buy.
Everything is 75mm. That is about 7.5cm or 2.95 inches. The ducting is aluminium foil. The T/Y piece is black plastic and the clamps are chrome-coloured metal. The whole set weighs 0.56kg.
There are 9 pieces. You get 2 heating ducts and 2 warm air vent outlets. You also get 1 T/Y pipe and 4 hose clamps. All parts are Ø75mm. The listing does not give the length of each duct so check with the seller if length matters for your install.
Yes. The T/Y piece connects 3 hoses at once. One goes to the heater and two go to the outlets. It adds an extra exhaust vent to an existing system and divides the warm air flow. The listing does not say how the air splits between the two outlets.
Remove the front panel first. This gives you access to the screw holes. Fix the outlet in place and refit the panel. The panel then turns 360 degrees so you can aim the warm air. The duct slides onto the outlet and a clamp holds it. One buyer found it easy to install with no leaks.
The listing says the aluminium foil duct is high temperature resistant and corrosion resistant. It does not give a maximum temperature. This ducting is for warm air only. It is not an exhaust pipe. Do not use it for exhaust gases from the heater.
The listing says it works in cars, trucks, ships, heavy machinery, agricultural machinery and industrial machinery. It also suits household use. It can replace old or damaged heating pipes. It works for cooling and ventilation ducts as well as heating.
Returns are free for items in new and unused condition. Amazon gives a 30-day right of return on many products. Go to your orders and start the return. Choose a return method and send it back. The seller is coolmagicy and it ships from Amazon Fulfillment.
| Brand | HOIIME |
|---|---|
| Style name | T-type 2 |
| Item type | Duct connector |
| Set name | 75mm Heater Duct and Exhaust Port Set (9 Piece) |
| Unit count | 9 |
| Number of pieces | 2 |
| Number of packs | 1 |
| Included components | Diesel heater pipe |
| Heating ducts included | 2 |
| Vent outlets included | 2 |
| T/Y pipe included | 1 |
| Hose clamps included | 4 |
| Size | 7.5 cm |
| T/Y pipe diameter | About 7.5 cm (3 inches) |
| Thread size | 7.5 cm |
| Thread type | BSP |
| Connector type | Tee |
| Number of hoses connected by T piece | 3 |
| Colour | Black |
| Material | Metal, plastic |
| Heating duct material | Aluminium foil |
| T/Y pipe material | Plastic |
| Hose clamp material | Metal |
| Hose clamp colour | Chrome |
| Vent outlet panel rotation | 360 degrees |
| Suitable heater power | 2 kW, 5 kW and 8 kW diesel air heaters |
| Compatible heater brands | Eberspächer, Webasto, Propex, ATC |
| Item weight | 0.56kg |
| Manufacturer | Choi |
| Country of origin | China |
| Part number | 12o |
| ASIN | B0CB8NGPPS |
