Fentar 200CM Diesel Heater Exhaust Pipe

Name: Fentar 200CM Diesel Heater Exhaust Pipe
Brand: Fentar
Price: 12.99 GBP
Availability: InStock

Diesel Heater Exhaust

From: Fentar

This is a flexible stainless steel exhaust pipe for air diesel heaters. It is 200cm long with a 2.5cm diameter and a polished finish with no burrs. The 200CM diesel heater exhaust pipe bends by hand so you can route it from the heater to the outside.

What does it do? It carries exhaust gas away from the heater. The 16x9cm muffler cuts the noise from the exhaust.

The kit comes with 2 clamps, 1 muffler, 2 screws and 1 bracket. Stainless steel is rust resistant and handles high heat. It costs £12.99 and 81% of ratings are 5 star.

Check Price

Amazon UK

Product Features

Thickened stainless steel - The pipe is made from thickened stainless steel. This resists corrosion and high temperatures, which matters because exhaust gas from a diesel heater is hot and damp. Steel that does not rust will last longer outdoors or under a vehicle. The polished finish leaves a smooth surface with no burrs. Flexible 200cm length - The pipe is 200cm long and bends by hand. Why does that matter? Heaters are rarely sited next to an exit point. You can curve the pipe round obstacles and out through the floor or wall. One reviewer used it to extend the exhaust from the heater to the outside. Built-in muffler - The 16x9cm muffler has a special internal structure. Exhaust gas leaves at high pressure and that creates noise. The muffler reduces it, which helps if you run the heater overnight in a van or garage. It simply attaches to the end of the pipe.

Full fitting kit - The kit includes 2 horse clamps, 1 muffler, 2 screws and 1 bracket. You do not need to buy extra parts. The clamps grip the stainless steel tightly, so the joints stay sealed. That prevents leaks and loose connections where exhaust gas could escape. Simple installation - Fit the muffler to the pipe. Connect the pipe to the heater outlet. Then secure it with the screws and clamps. This takes basic hand tools and no trip to a repair shop. Doing it yourself saves labour costs and time. The 2.5cm diameter is the standard size for air diesel heaters. Wide fitment and vibration resistance - The pipe suits vehicles with air diesel heaters, including cars, trucks, SUVs and lawn mowers. The anti-vibration design reduces wear from engine movement or misalignment. It also works as a replacement for old or damaged parts. It is priced at £12.99 with free returns.

FAQs

How long is this exhaust pipe and what size is the diameter?

The size selector and the title say 200cm. The pipe is 2.5cm in diameter. That is the standard size for most air diesel heaters.

The listing is not consistent though. One bullet point and the specification table mention 300cm. Which one will you get? The 200cm size is listed in the "what's in the box" section and the size selector, so check you have picked the length you need before you order. A 300cm length is also available.

What is in the box?

The kit includes the 200CM diesel heater exhaust pipe plus the parts you need to fit it. You get:

2 horse clamps, 1 muffler, 2 screws and 1 bracket. The muffler measures 16 x 9cm. You do not need to buy extra clips or a silencer for a basic install.

What is the pipe made from and will it rust?

It is made from thickened stainless steel with a polished finish. The surface is smooth with no burrs. The seller says it resists corrosion and high temperatures.

Why does this matter? A diesel heater exhaust carries hot gas and moisture. Mild steel rots quickly in that job. Stainless steel is far less likely to rust through. The hose clamps are stainless steel too.

Does the muffler really cut down noise?

The kit has a muffler with a special internal structure built to reduce exhaust noise. Exhaust gas leaves at high pressure and that pressure causes the sound. The muffler is there to take that edge off.

The listing gives no decibel figure. So you should not expect a silent heater. It should be quieter than a bare pipe. Most reviews are short and positive. None of them complain about noise.

Is it easy to fit and do I need a garage?

Fitting is a clamp-on job. You push the muffler onto the pipe and connect the pipe to the heater outlet. Then you secure it with the clamps and screws. The bracket holds the run in place on the vehicle.

The pipe is flexible so you can bend it by hand around obstacles. One buyer used it to extend the exhaust from where the heater sat to the outside. A basic screwdriver is all most people will need. The seller says this saves a trip to a repair shop.

Which vehicles and heaters does it fit?

The seller says it suits vehicles with an air diesel heater. That includes cars, trucks, SUVs and lawn mowers. It is also sold as a replacement for old or damaged exhaust pipes.

Check the outlet on your heater first. The pipe is 2.5cm across. If your heater uses a different outlet size it will not fit. The product is listed as vehicle specific fit but no model list is given.

Are there any known problems with the fit?

Yes. One 1-star review says the pipe arrived with misshapen ends. After the buyer reshaped them the hose end was still too small to slide over the silencer tube. They had to make an adapter.

How common is this? Of the 119 ratings, 6% were 1 star and 81% were 5 star. Check the ends of the pipe as soon as it arrives. Test the fit on the muffler before you start fitting it to the vehicle.

What is the return policy and who sells it?

The item is sold by FtrsTrade and sent from Amazon fulfilment. The brand is Fentar. It is made in China. The part number is FTRS-HK102-01 and the model number is PQ-001.

Returns are free for the shipping address you chose. You have a 30-day right of return if the item is new and unused. To start one you go to your orders and select the return method. The product holds 4.6 out of 5 stars and the Amazon's Choice badge. More than 50 were bought in the past month.

Fentar 200CM Diesel Heater Exhaust Pipe Specs

200CM diesel heater exhaust pipe Specs

Fentar 200cm Diesel Heater Exhaust Pipe: Stainless Steel Flexible Hose with Muffler The Fentar diesel heater exhaust pipe is a flexible stainless steel hose for the exhaust of air diesel heaters. The listing gives the pipe a 2.5cm diameter. The kit comes with a muffler that measures 16cm by 9cm. It costs £12.99 including VAT. The brand is Fentar and the seller is FtrsTrade. The item is sent from Amazon fulfilment. The listing uses model number PQ-001 and manufacturer part number FTRS-HK102-01. Material and build The pipe is made from thickened stainless steel. This resists corrosion and high temperatures. The finish is polished. The listing says this leaves a smooth surface with no burrs. The pipe is flexible and can be bent by hand to fit the route from the heater to the outside. The hose clamps are also stainless steel. They hold the pipe tight and help prevent leaks and loose joints. The listing also describes an anti-vibration design. It aims to reduce wear caused by engine movement or exhaust misalignment. Muffler and noise The kit includes a muffler with a special internal structure. Exhaust gas leaves at high pressure and this causes noise. The muffler is there to reduce that noise. Length The listing is not consistent on length. The title and size selector say 200cm. The "What's in the box" section and the package list in the description also say 200cm. One bullet point and the product specification say 300cm, with a 2.5cm diameter. The product is sold in 200cm and 300cm lengths. Check the length selected before you buy. What is in the pack - 1 diesel heater exhaust pipe (200cm) - 2 horse clamps - 1 muffler - 2 screws - 1 bracket Fitting Attach the muffler to the exhaust pipe. Then connect the pipe to the vehicle and secure it with the screws and clamps. The listing says no trip to a garage is needed. The installation type is clamp-on. Compatibility The listing says it suits vehicles with air diesel heaters. This includes most cars, trucks, SUVs and lawn mowers. The automotive fit type is listed as vehicle specific fit. It can also replace old or damaged exhaust parts. The country of origin is China. Customer feedback Amazon shows 119 ratings. One reviewer used it to extend the exhaust from the heater to the outside and found the length right. Other buyers called it good quality and good value. A French reviewer described it as a very flexible stainless steel hose of good quality. A Spanish reviewer called it a complete kit where everything fitted well. One buyer received a pipe with misshapen ends. The hose end was also too small to fit over the silencer tube. That buyer made an adapter to join them. Returns Returns are free to the shipping address chosen. The item must be new and unused. A 30-day right of return applies.

Brand	Fentar
Manufacturer	Fentar
Model number	PQ-001
Manufacturer part number	FTRS-HK102-01
ASIN	B0DDQ9GTBM
Product type	Diesel heater exhaust pipe
Colour	Silver
Material	Stainless steel
Finish type	Polished
Pipe length	200cm
Other length available	300cm
Pipe diameter	2.5cm
Muffler size	16cm x 9cm
Pipe construction	Flexible and bendable by hand
Installation type	Clamp-on
Automotive fit type	Vehicle specific fit
Compatible with	Air diesel heaters in cars, trucks, SUVs and lawn mowers
Clamp material	Stainless steel
Number of horse clamps	2
Number of mufflers	1
Number of screws	2
Number of brackets	1
Vibration protection	Anti-vibration design
Corrosion resistance	Corrosion and rust resistant
Country of origin	China