This is a 200cm flexible exhaust hose for diesel air heaters. It is made from 304 stainless steel and has a 2.5cm inner diameter. It replaces the shorter pipe supplied with the heater and carries fumes to the other side of the vehicle, away from the awning.
The spiral coil body helps shed heat and copes with temperatures from 125°C to 200°C. It is semi-rigid, so you can adjust the angle and position. It also helps reduce tail pipe noise.
Each Parking heater exhaust pipe comes with 2 stainless steel hose clamps and costs £12.99. It is also sold in 60cm, 120cm and 300cm lengths.
304 Stainless Steel - Why does the grade matter? 304 stainless steel resists rust and corrosion, which is a real problem for exhaust parts kept in damp sheds, garages and boats. It is also wear-resistant. Of 56 customer comments on quality, 53 were positive, so most people found it well made.
Four Lengths - Which size do you need? The pipe comes in 60cm, 120cm, 200cm and 300cm. The 60cm costs £8.99 and the 120cm costs £9.99. This 200cm length costs £12.99. One buyer used it to reach from a shed to the outside without a connector.
Noise Reduction - Heater tail pipes can be loud. This pipe replaces the shorter one supplied with the heater and sends exhaust to the other side of the vehicle, away from the awning. Moving the outlet further away lowers the noise you hear where you sit or sleep.
Spiral Coil Design - What does the coil do? The spiral body helps heat dissipate faster, which reduces the risk of the pipe getting too hot. The pipe is rated for temperatures from 125°C to 200°C. That is a useful margin for a part sitting right next to a diesel burner.
Airtight Clamped Fit - A leaking exhaust lets fumes back in. The pipe has a 25mm outer diameter and comes with 2 stainless steel hose clamps. It slides straight onto the heater outlet and seals once tightened. Fitting takes a few minutes. One buyer ran it up a 250cm soil pipe with no gas escaping.
Adjustable Shape - Can you bend it to suit your setup? Yes. You can set the angle and position as needed and one buyer cut it to length. Take care though. Several buyers say you get one chance to bend it. Over-flexing or straightening it too far can make it split.
The pipe has a 25mm outer diameter and a 2.5cm inner diameter. This listing is the 200cm length. It is sold as a universal fit and described as suitable for most diesel air parking heaters.
Check your heater's exhaust outlet before you buy. It needs to be 25mm. One buyer fitted it to an LF diesel heater as an extension. Another said it fitted their heater perfectly. A third could not fit it to their own heater. So measure first.
There are four lengths: 60cm, 120cm, 200cm and 300cm. All use the same 25mm diameter. Pick the length by working out the route from the heater to where the fumes need to exit.
Do you need the full length? Not always. A buyer said they cut the pipe down to the length they needed. Cutting is easy to do, but you cannot add length back. If you are unsure, go longer.
The pipe is made from 304 stainless steel. This grade is known for resisting corrosion and wear. The listing says it will not rust or corrode. The hose clamps are stainless steel too.
The temperature resistance is listed as 125°C to 200°C. The finish is silver. The pipe body has a spiral coil design. This helps it shed heat faster and avoids excessive temperature build-up.
It can help. The pipe is meant to replace the shorter one supplied with the heater. You can route it to the other side of the vehicle and away from the awning. That moves the noise of the tail pipe away from where you sit or sleep.
The listing says the stainless steel construction reduces exhaust noise. It does not give a decibel figure. Treat it as a way to move and soften the sound rather than remove it.
It takes a few minutes. The pipe replaces an old or broken one directly. Slide it onto the heater outlet and tighten the clamp. One buyer said it slides straight on.
The box holds 1 exhaust hose and 2 stainless steel hose clamps. A buyer who used the supplied jubilee clips said they held the pipe in place well. Another added their own clip to stop it moving at the housing. You will need a screwdriver for the clamps. It is not included.
Yes. You can adjust the angle and position to suit your setup. Buyers describe it as sturdy but flexible. One said it takes a while to get the shape you want.
There is a catch. Several buyers warn that you get one good chance at each bend. Bend it again or straighten it too far and it can split. One buyer said it split when they tried to remove 180 degree bends. Plan the route before you bend it. Make gentle curves rather than sharp kinks.
The listing says the pipe and clamps give an airtight seal with no leaks. The clamp pulls the pipe tight onto the outlet. That matters because exhaust from a diesel heater should never enter the living space.
One buyer ran the pipe about 2.5 metres up an old soil pipe so no fumes could escape. Another kept the exhaust away from the heater's air inlet. Always route the outlet away from air intakes and windows. Check the clamps after the first few runs.
The pipe has a 4.6 out of 5 rating from 1,617 ratings. 79% gave five stars and 12% gave four. 3% gave one star. It ranks number 1 in Car Exhaust Pipes on Amazon.
Of 56 mentions of quality, 53 were positive. Durability was mixed. Ten buyers mentioned it and six were negative. The main complaints were splitting when bent too far and one case of distorted ends on delivery. Returns are free within 30 days if the item is new and unused.
| Specification | Detail |
|---|---|
| Product name | URAQT Parking Heater Exhaust Pipe |
| Brand | URAQT |
| Manufacturer | URAQT |
| Model number | U4-200FQG220930-FBA |
| ASIN | B0BK1Y4TXY |
| Item type | Parking heater exhaust pipe |
| Material | Stainless steel |
| Stainless steel grade | 304 |
| Colour | Silver |
| Length | 200 cm |
| Diameter | 2.5 cm |
| Inner diameter | 2.5 cm |
| Temperature resistance | 125°C to 200°C |
| Available lengths | 60 cm, 120 cm, 200 cm and 300 cm |
| Construction | Flexible spiral coil body |
| Installation type | Clamp-on |
| Fit type | Universal fit |
| Vehicle service type | Car |
| Compatible heater type | Diesel air parking heaters |
| Intended use | Replacement or extension of heater exhaust pipe |
| Clamp material | Stainless steel |
| Number of hose clamps | 2 |
| Number of pipes | 1 |
| Package contents | 1 x air heater exhaust pipe and 2 x hose clamps |
| Country of origin | China |
