This FASBET kit is a set of aluminium foil ducting parts for air diesel heaters. It has a 75mm T-piece that splits one heater output into two. A Y-piece version is also sold if you prefer that layout. The kit costs £17.99, which works out at £2.00 per piece across the 9 pieces.
The set suits 2kW, 5kW and 8kW diesel air heaters. Use it to extend the heater output or send warm air to extra vents in a van, camper or workshop. The foil is resistant to high temperatures and corrosion and it is easy to handle.
Each box holds 2 x 75mm heating ducts, 2 x 75mm air outlets, 1 x 75mm T-piece and 4 hose clamps. This Diesel heater ducting 75mm kit carries a 2 year manufacturer warranty and a 30-day return window.
Aluminium foil construction - The ducting is made from aluminium foil. This matters because a heater outlet runs hot and plain plastic can soften or split. Foil resists high temperatures and corrosion, so the pipe keeps its shape. It is also light and easy to handle, which makes routing it behind panels simpler.
75mm T-piece splitter - What does the T-piece do? It takes the single warm air output from the heater and divides it into two paths. You can feed two vents from one heater. One customer used it to add extra vents to an existing heater and said it fitted without trouble. Note that outlets attach through the hose rather than straight onto the T.
Fits 2kW, 5kW and 8kW heaters - The 75mm size is the common outlet diameter on these heater ratings. That means you do not need adaptors for most air diesel heaters in this range. It also suits cold, warm and diesel heating air ducts. Check your own heater outlet measures 75mm before you order.
Complete 9 piece kit - The box includes 2 x 75mm ducts, 2 x 75mm air outlets, 1 x T-piece and 4 hose clamps. Is anything else needed? Not for the ducting itself. The clamps hold each joint tight. At £17.99 the cost is £2.00 per piece. Buy 4 and Amazon lists a 5% saving.
Rotating outlet panel - The air outlets have a removable front panel that gives access to the screw holes. This lets you fix the vent in place properly. The air panel then turns 360 degrees. So you can point warm air at a bed, a seat or a work area without moving the whole duct.
Rated 4.5 from 144 ratings - Why trust the score? 74% of ratings are 5 star and only 3% are 1 or 2 star. Customers mention quality 9 times with no negative comments. Functionality gets 6 mentions and none are negative. One buyer notes it suits occasional use rather than heavy abuse. Support is by email, 24 hours a day.
The set has 9 pieces. You get 2 heating ducts and 2 air outlets (the mushroom head type). You also get 1 T piece and 4 hose clamps. Every duct, outlet and the T piece is 75mm across. The T piece is the part that lets you split one heater output into two runs.
It is made for 2KW, 5KW and 8KW diesel air heaters. These are the common sizes used in vans, campers, boats and workshops. The 75mm size matches the warm air outlet on those units. If your heater outlet is a different size, check it before ordering. The listing also says the ducting suits cold air and warm air runs.
Both are sold as 75mm kits. The T piece splits the airflow at a right angle. The Y piece splits it at an angle, so the two branches point the same way as the main run. Pick the one that suits the layout of your vehicle or room. This listing is the T version.
The ducts are made from aluminium foil. The listing says this resists high temperatures and corrosion. It is also easy to handle and cut to length. One buyer called it cheap and cheerful. They felt it would not take a lot of abuse, but said it was fine for occasional use.
No. Despite the word "exhaust" in the title, this is warm air ducting. It carries heated air from the heater to the outlets. It does not carry exhaust fumes. A Swedish buyer noted it came without an exhaust pipe, unlike a kit they had bought from another brand. Buy a stainless steel exhaust pipe separately if you need one.
Not directly. A French buyer pointed this out. The air outlets cannot attach to the T without a length of flexible duct in between. This means you cannot have one outlet right at the T and another further away. Plan your layout around the two ducts supplied. Cut each duct to the length you need.
Buyers reported no fitting problems. One fitted it in a T6 transporter and said everything fitted. Another said it fitted the heater perfectly. The outlet has a removable front panel that gives access to the screw holes. The air panel rotates 360 degrees, so you can point warm air where you want it. The four hose clamps hold the ducts on the connectors.
FASBET gives a 2 year manufacturer warranty. The seller also offers support by email, 24 hours a day. You get a 30-day return window and returns are free. The item must be new and unused. The rating is 4.5 out of 5 from 144 ratings. 74% of those were five star.
| Specification | Detail |
|---|---|
| Product type | Diesel heater ducting set |
| Brand | FASBET |
| Manufacturer | FASBET |
| Variant | 75mm-T |
| Other variant available | 75mm-Y |
| Duct diameter | 7.5 cm |
| Material | Aluminium (aluminium foil ducts) |
| Colour | Black |
| Exterior finish | Aluminium |
| Connector type | T-tube |
| Thread type | Metric tapered |
| Item dimensions (L x W x H) | 1 x 1 cm (as listed) |
| Number of pieces | 9 |
| Number of packs | 1 |
| Unit count | 9 |
| Heating ducts included | 2 x 7.5 cm diameter |
| Air outlets included | 2 x 7.5 cm diameter |
| T pipe included | 1 x 7.5 cm diameter |
| Hose clamps included | 4 |
| Included components (seller listing) | 2 mushroom head air outlets and 4 clips |
| Compatible heaters | 2KW, 5KW and 8KW diesel air heaters |
| Intended use | Cold, warm and diesel heating air ducts |
| Air outlet rotation | 360 degrees |
| Front panel | Removable for access to screw holes |
| Model number | Diesel Standheizung |
| Part number | Parking Air diesel Heater Set |
| Item type name | Parking Air diesel Heater Set |
| Set name | Diesel Heater Exhaust Pipe Set |
| Manufacturer warranty | 2 years |
| Country of origin | China |
| UPC | 662987940795 |
| ASIN | B0C4CXJWSP |
